Top 10 common forklift accidents ， forklift operation should take note of these matters ！.

Top 10 common forklift accidents ， forklift operation should take note of these matters ！.

Blog Article

Don't ignore the forklift at work. If the operation is not good, there will be serious crashes in minutes, and there are lots of accidents including forklifts.

Situation 1: The forklift freight obstructed the driver's sight, and the individual in front can not be discovered, resulting in a moving accident.
Instance 2: In order to preserve the balance of the forklift when raising hefty goods, the employees used their body weight as the weight, which nearly triggered casualties.
Case 3: The width of the forklift freight goes beyond the allowed size of the route and hangs on the roadside rack, which practically triggers an accident.
Situation 4: Forklift is speeding up and rolls over throughout a turn.
Instance 5: The forklift driver did not observe the pedestrian, and the pedestrian did not see the forklift.
Case 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the safety belt, the forklift lifter falls and the motorist is squashed when the forklift rolls over.
Situation 7: The forklift vehicle driver did not use a seat belt and dropped from the car when it surrendered and was crushed.
Forklift operation must pay attention to these issues ：.

Start.
1. Before beginning, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, beep the horn first and then start.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge have to be safe prior to beginning.
3. When the forklift starts with a load, the chauffeur needs to first verify that the tons is secure and trustworthy.
4. The begin needs to be sluggish and consistent.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not raise the fork expensive when driving. When entering and leaving the job site or while driving, be careful that there will be no barriers in the sky. When the load is taking a trip, the fork has to not be elevated too high, which will affect the security of the forklift. .
3. After discharging, the fork ought to be lowered to the normal driving placement before driving. .
4. When transforming, if there are pedestrians or vehicles close by, the driving signal needs to be issued initially. High-speed sharp turns are banned. High-speed doglegs will certainly cause the lorry to lose side security and tip over. .
5. When the forklift is downhill, it is purely forbidden to shut off the fire and slide, and it is forbidden to brake all of a sudden while driving with loads unless there are unique circumstances.
6. When the forklift is running, it must follow the traffic rules in the manufacturing facility and have to keep a particular security distance from the automobile ahead. .
7. When the forklift is running, the tons must remain in the lowest placement that does not prevent the driving, and the gantry needs to be properly slanted back. The lots will not be elevated except when stacking or loading. .
8. The height of the load should not obstruct the motorist's sight. In unique conditions, when the item impacts the forward vision, drive at a low rate when turning around.
9. It is forbidden to turn on the ramp, nor to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a reduced rate when getting in the production workshop location. .
11. When the forklift is raised, raised or driven, it is forbidden for employees to base on the fork to hold items and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a timely fashion, and they will certainly never ever operate with health problems or hide them.

loading and discharging.
1. When fork-loading products, the distance in between both forks ought to be readjusted as needed to make the load of both forks well balanced and not skewed, and one side of the thing should protest the shelf. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or draw. In unique situations, safety indication have to be established to remind surrounding pedestrians. .
3. In the process of loading and dumping items, the forklift must be stopped with the brake. .
4. The speed of the automobile need to be sluggish and consistent. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork ought to be as deep as possible under the tons, and it needs to be noted that the fork pointer should not touch other products or things. The load must be stabilized with minimal back tilt of the gantry to make sure that the lots does not glide in reverse. The mast can be tilted ahead somewhat when the lots is reduced to allow for easy positioning of the load and extraction of the forks. .
6. It is forbidden to fork items at high speed and ram hard objects with the fork head. .
7. When the forklift is working, it is forbidden for individuals to loaf the fork, so regarding prevent the collapse of the goods and harm people. .
8. Overwhelming is banned, and it is forbidden to utilize forks to raise employees to engage in high-altitude operations to avoid high-altitude falling crashes. .
9. It is not permitted to use the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to use forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you must dump the goods or reduced the fork structure.
2. Pull the emergency brake take care of to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is removed. (Except for special conditions, such as the motorist does not leave the lorry's view and does not go beyond 1 minute).
4. Get rid of the secret. .

Forklift Operation Precautions.
1. Before Electric Forklift Truck for Warehouse and after the forklift procedure, the look ought to be examined, and gas, lubing oil and air conditioning water ought to be included.
2. Inspect the safety efficiency of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature are typical.
5. After the forklift is running, the outside leakage ought to likewise be checked and the seals must be changed in time.

Forklift Safety Operation Specifications.
1. You have to inspect before Electric Forklift Truck for Warehouse leaving the car;.
2. When you encounter a person before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " totally free switching";.
6. Adding and down the slope must be slow and consistent, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is above 10%, the vehicle needs to be driven backwards when worsening;.
8. When the forklift workers lug the goods and progress, if they run into big or hefty goods and most likely to the driver's view, they should take the turning around exercise
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork procedure is not allowed.
2. It is not permitted to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll objects.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Car park is not permitted under the following conditions.
1. Contours, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844